(주)동일과학

편리한 핸드 헬드 설계로 PendoTECH 단일 사용 압력 센서 ™

sensors 센서가 0-6psi +/- 2 % 판독 값을 읽습니다. 독서의 0-30 psi +/- 3 %
배터리 작동 - 9V 배터리 사용 (약 14 시간 사용)
pressure 압력 센서와 함께 사용할 때 보정이 필요하지 않습니다 (표준화 된 센서 출력 신호를 읽음)
sensor 0 psi에서 센서 용기 용 원터치 버튼
최소 / 최대 압력 표시 버튼

Specifications & Description

Max Pressure (PSI)76
Battery TypeOne 9 V
Resolution0.1
DescriptionHandheld PressureMAT Monitor for one pressure sensor

Includes

12-ft (3.7 m) re-usable cable.

Key Features

Reads sensors to their specification of 0-6 psi +/- 2% of reading; 0-30 psi +/- 3% of reading
Battery operated - Uses 9V battery (approximate 14 hours of power)
No calibration required when used with the pressure sensors (the standardized sensor output signal is read)
One-touch button for sensor tare at 0 psi
Minimum / maximum pressure display buttons
Auto shut-off after 10 minutes
Display to x.x psi with updates >2X per second (x.xx upon request)

More About this Item

• Available for use with tubing from small scale to 1 inch inner diameter (available sizes are luer fitting; hosebarb with ¼, 3/8, ½, ¾, and 1 inch sizes); and sanitary flange
• Unobstructed flow path & no dead legs
• Qualified for use with no failure to -7 to 75 psi
• Compatible with gamma irradiation
• All materials meet USP Class VI
• Integral 12 inch cable connects to reusable cable via molded connector
• Each sensor is tested for quality and accuracy during manufacturing and rejected if out of specification (NO CALIBRATION REQUIRED!)
• Manufactured in a clean room in an FDAregistered, ISO 13485 facility
• Low cost
• Polycarbonate material or caustic resistant polysulfone
• Certificate of quality included with lot certification; individual NIST Calibration Certificates are optional
• May be non-invasively tested in-place via test port