(주)동일과학

Specifications

Item Code	212730
Model	DL410
Water evaporation rate	Max. approx. 3,000 ml/h
Temperature control range	40°C - 300°C at inlet
Temperature control accuracy	± 1°C at inlet
Dry air flow rate	Max. 1.2 m³/min
Air spray pressure control range	0 - 600 k Pa (0-6 kg/cm²)
Spraying system	Two-way nozzle (Dia. of orifice: 0.7mm) Nozzle No.3 standard supply
Spray/hot air contact system	Downward spray parallel flow system
Temperature controller	PID digital temperature controller
Temperature sensor	K thermocouple
Stainless pipe heater	2kW×2 at 240V
Sample liquid feeding pump	Quantitative peristaltic pump, Flow rate variable up to 70ml/min.
Solvent recovering capability (optional)	Organic solvent recovery unit GAS410 must be used
Spray line cleaning	Needle inside the nozzle to clean the mesh automatically
Safety device	Self-diagnostic functions (e.g. temperature aberration); Sample feed reversal
Air spray pressure gauge	Bourdon tube: 600k Pa (6 kg/cm²)
Included Accessories/Sample liquid tube	Silicone tube - 2 pcs
Included Accessories/Safety cover	Yes
Included Accessories/Static removal brush	1pc
Included Accessories/Air hose	1 pc
Included Accessories/Exhaust duct	1 pc
Optional Accessories/Organic solvent recovery Unit	GAS410
Inlet/outlet temperature recorder	212792 - Factory installed
Viton/Tiron feeding tube	Please inquire
Nozzle	4, 5 (options), 3 standard
Compressed air	28 L/min air volume and 8 kgf/cm2 compressed air is required
Type of gas	N2 gas (99.99% purity, Medical grade) is required when using GAS410
External dimensions（W×D×H mm）	1750×1060×880mm
Power Source	AC220V Single-phase with step down transformer
Weight	180kg